■商品概要 Parts list: (1) Engine belly guard 1 (2) Exhaust generating bracket 1 (3) Front mounting bracket A 1 (4) Front mounting bracket B 1 (5) Rear mounting bracket A 1 (6) Rear leg B 1 (7) Round socket head bolt M6×15mm 7 (8) Socket head bolt M6×15mm 2 (9) Socket head bolt M6×25mm 2 (10) M6 nut 3 (11) M6 washer 11 (12) M6 washer 3
■詳細説明 Tools Hex wrench 4,5,6,square wrench 10Installation 1. Remove the original exhaust cover. Remove the rubber boot andcollar from the original pipe. 2. Attach the rubber boot and collar to the ehaust pipebracket. 3. Assemble the rubber and collar with the engine belly guard. 4. Assemble the exhaust pipe bracket onto the engine belly guardusing round socket head bolts M6×15mm(7) and washers M6(11). 5. Secure the front of the belly guard with M6×15(7) round sockethead bolts,M6(11) washers,and then tighten with M6(10) nuts andspring washers. 6. Assemble front mounting bracket A(3) to B(4) using M6×15(8)socket head bolts and M6(11) washers. Temporarily tighten them. 7. Assemble the front mounting bracket to the front oil pan ear asshown using the M6×25mm socket head bolt (9) with the M6 washer(11) and then tighten with the M6 nut (10) with the spring washer(12). Temporarily tightened
■注意点 ※Installation of decorative parts must be carried out within thelimits established by law. Installation and use of decorative partsis the responsibility of the vehicle owner or user. You shouldcheck the safety of the vehicle before installation. ※When installing decorative parts,you should study the various usermanuals completely before installing for accuracy and beforedriving. You should check the condition thoroughly. If while the car is running something abnormal occurs,you shouldstop the car immediately and have it checked at a servicecenter. ※Decorative parts may differ in quality and durability from genuineparts installed on the vehicle. ※Various decorative parts Must be installed correctly according tothe model and location specified. Installation should not beperformed other than the vehicle model and location specified. ※In the event that a malfunction occurs on the vehicle due to theinstallation of decorative parts,warranty or protection servicescannot be claimed. ※Some decorative parts may require an application for alteration oraddition. ※取扱説明書が付属する場合は外国語となります。 ※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。 ※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
Parts list:
(1) Engine belly guard 1
(2) Exhaust generating bracket 1
(3) Front mounting bracket A 1
(4) Front mounting bracket B 1
(5) Rear mounting bracket A 1
(6) Rear leg B 1
(7) Round socket head bolt M6×15mm 7
(8) Socket head bolt M6×15mm 2
(9) Socket head bolt M6×25mm 2
(10) M6 nut 3
(11) M6 washer 11
(12) M6 washer 3
■詳細説明
Tools
Hex wrench 4,5,6,square wrench 10Installation
1. Remove the original exhaust cover. Remove the rubber boot andcollar from the original pipe.
2. Attach the rubber boot and collar to the ehaust pipebracket.
3. Assemble the rubber and collar with the engine belly guard.
4. Assemble the exhaust pipe bracket onto the engine belly guardusing round socket head bolts M6×15mm(7) and washers M6(11).
5. Secure the front of the belly guard with M6×15(7) round sockethead bolts,M6(11) washers,and then tighten with M6(10) nuts andspring washers.
6. Assemble front mounting bracket A(3) to B(4) using M6×15(8)socket head bolts and M6(11) washers. Temporarily tighten them.
7. Assemble the front mounting bracket to the front oil pan ear asshown using the M6×25mm socket head bolt (9) with the M6 washer(11) and then tighten with the M6 nut (10) with the spring washer(12). Temporarily tightened
■注意点
※Installation of decorative parts must be carried out within thelimits established by law. Installation and use of decorative partsis the responsibility of the vehicle owner or user. You shouldcheck the safety of the vehicle before installation.
※When installing decorative parts,you should study the various usermanuals completely before installing for accuracy and beforedriving. You should check the condition thoroughly.
If while the car is running something abnormal occurs,you shouldstop the car immediately and have it checked at a servicecenter.
※Decorative parts may differ in quality and durability from genuineparts installed on the vehicle.
※Various decorative parts Must be installed correctly according tothe model and location specified. Installation should not beperformed other than the vehicle model and location specified.
※In the event that a malfunction occurs on the vehicle due to theinstallation of decorative parts,warranty or protection servicescannot be claimed.
※Some decorative parts may require an application for alteration oraddition.
※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
※画像はイメージです。
■適合車種
NX500
NX500